The key tool here is the multiplier, which you want to increase for all cores. Once you’re back in Windows, run XTU’s Memory Stress Test for at least a few minutes to make sure the XMP profile is stable. After applying this profile, you’ll need to reboot. Profile #1 is always a good starting point. This overclocks your RAM to a predetermined speed that should be stable. Now, if your motherboard BIOS provides memory information, it’s time to enable an XMP profile. Worst case, your power bill goes up a little bit. Don’t worry about them damaging your CPU these limits will ensure the CPU gets the maximum amount of power it needs from the PSU so it’ll never be throttled, but it isn’t dangerous there are still safeties in place that will protect the CPU. You can turn these sliders all the way up. There are a couple of settings Pineau recommends changing before you start adding speed: the Turbo Boost Power Max and Processor Current Limit.ĭepending on your system, you may also have a Turbo Boost Short Power Max option to increase as well. This will give you a reference point for how much faster your PC is once you’re finished tuning it. Run XTU’s built-in benchmark before you start overclocking and upload your score to HWBot if you’re interested in keeping a profile. Overclocking with Intel's Extreme Tuning Utility
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |